Tips on How to Clean Your Air Conditioning System

Category : General
cleaning air conditioning system

Cleaning your air conditioning system is important, but not very fun. It can be a little bit of a process, but it doesn’t have to be hard or time-consuming. Cleaning your AC system is an important task that you should take care of regularly.

The sooner you clean your system, the better it will work. We recommend you to take the help of professionals such as ducted air conditioning in Sydney contractors. If you’re looking for tips on how to clean your air conditioning system, we’ve got you covered.

Determine Air Conditioning Type

There are three different types of air conditioning systems. The first is an absorption system that uses refrigerants like Freon and R-22 to remove moisture from the air inside your home. These systems are typically older buildings with leaky ductwork and may need more attention than other types of systems. The second type of system is evaporation cooling. Which uses water to cool off the air in your home by evaporating it through coils on the outside walls of buildings. 

This type of system needs to be cleaned out regularly since mold builds up over time without regular cleaning. Which can lead to health problems for both you and your family members living in the house! Finally, there are true refrigerant-based cooling systems like those used in newer homes today. Which use liquid refrigerants instead of Freon or R-22

Be Ready for Cleaning of Air Conditioning System

Before you start cleaning your air conditioning system. It’s a good idea to make sure that the weather is dry and the temperature is warm. You should also be wearing closed-toe shoes and work clothes that are easy to get dirty. Also, you should ensure that your AC is turned off before you start cleaning. Remove all furniture from around the unit and vacuum any dirt or debris that may be on top of it.

Get Rid of Smudges

If you have a ducted air conditioning system, you know that it can be a challenge to keep it clean. Over time, dirt and dust can build up on the air conditioning unit. Making it difficult for the system to function properly.

Fortunately, there are a few things you can do to clean your ducted AC system and keep it running smoothly. Start by removing any smudges from the window with a soft rag or paper towel. Then wipe down the exterior of the unit with a damp cloth.

Clean Grills and Vents of Air Conditioning

Use a brush when cleaning grills and vents, then rinse both out with clean water before using them again. use a soft brush to remove dirt from around the outside of your AC unit and fan blades. Remove the grille and using a vacuum cleaner, vacuum out any dust that may have collected inside the unit.

Also, you should use a rag or soft cloth to wipe down any areas on top or sides of your air conditioner where dirt can collect. But always keep in mind that you should never use abrasive cleaners or harsh chemicals.

Properly Get Rid of Grease

While ducted air conditioners are effective at keeping homes cool, they can also be a magnet for grease and dust. Over time, this build-up can cause the AC to work less efficiently and potentially lead to health problems for occupants. If your system has a condenser fan motor connected to it. Take note of how much grease or dirt is on those parts so that you can clean them properly later on in this process (you don’t want to spray oil on either one).

So how do you remove grease from a ducted air conditioner? The first step is to identify the source of the grease build-up. This can be done by visual inspection or by hiring a professional like air conditioning contractors to inspect the ducts. Once the source is identified, the ducts can be cleaned with a variety of methods. It includes vacuuming, steam cleaning, or using brush attachments on a vacuum cleaner. In most cases, it is best to hire a professional to clean the ducts. This will ensure that the job is done properly and that the AC is returned to optimal working conditions.

Use a Solution of Water & Baking Soda

Spray a solution of water and baking soda into the system’s drain pan or trap where water drains out of the unit (this is usually located under an access panel). Let this sit for about 15 minutes to absorb any remaining water in it. Before removing it by lifting it on its cover plate with a screwdriver. This will prevent clogs from forming inside later on down the road. When debris gets stuck in there due to repeated usage without proper cleaning the first time around! 

Using an air compressor with an adjustable nozzle tip can help when using a spray bottle full of water or other cleaning solutions (liquid dish soap works well too!). A pipe cleaner can be used instead if needed!

Leave a comment